The TAPP Drum Adapter puts a 400-2,500+ round drum on your VFC SCAR-H MK17/APFG XM7 for suppressive fire.
Spec card
| Type | Drum |
|---|---|
| Feeds from | Drum magazine (pre-installed) |
| BB capacity | 400-2,500+ |
| Overall profile | Medium to Large |
| Recommended mags | Tokyo Marui or Angel Custom drum |
| Best for | Suppressive fire and general skirmishes |
Drum options
- 400rd Mini: 400-round mini drum
- 1500rd Flash: 1,500-round flash drum
- 1500rd Electric: 1,500-round electric drum
- 1500rd Electric Tan: 1,500-round electric drum in tan
- 2000rd Flash: 2,000-round flash drum
- 2000rd Electric: 2,000-round electric drum
- 1200rd Twin: 1,200-round twin drum
- Adapter Only – Angel Custom: adapter only, for an Angel Custom drum you already own
- Adapter Only – TM Mini: adapter only, for a Tokyo Marui mini drum you already own
- Adapter Only – TM Twin: adapter only, for a Tokyo Marui twin drum you already own
- Adapter Only – A&K: adapter only, for an A&K drum you already own
- Adapter Only – ICS: adapter only, for an ICS drum you already own
Compatibility
| Brand / Platform | Compatibility Verification | Tuning & Adjustment Notes |
|---|---|---|
| VFC SCAR-H MK17/APFG XM7 | Direct Native Fit | Purpose-built for the VFC SCAR-H MK17/APFG XM7 magazine well and feed geometry. Fine-tune the adjustable plunger height to establish a positive compression seal against the loading nozzle, maximising gas efficiency and feed consistency while preventing mechanical drag during the cycle. |
| VFC SR25 / M110 / FAL / HK417 | Direct Native Fit | These share the same VFC large-frame 7.62 magazine shell and feed geometry as the SCAR-H MK17/APFG XM7 platform, so this adapter installs and seals the same way. Fine-tune the adjustable plunger height to establish a positive compression seal against the loading nozzle, maximising gas efficiency and feed consistency while preventing mechanical drag during the cycle. |
Also sold as dedicated listings: VFC FAL HPA Adapter/Drum and VFC HK417 HPA Adapter/Drum — all four use the same magazine, so any of these listings will fit any of these platforms.
What's in the box and how to install
- Plug and play: no pulling valves or feed lips from stock mags.
- Materials: standard body is Nylon PA12. Carbon Fiber is available (3x stiffness, up to 38% higher tensile strength than Nylon 12).
- Made in the USA by TAPP Airsoft.
- Install: insert with the bolt or slide locked back. US-spec Foster fitting included, never exceed 150 PSI, use a secondary low-pressure regulator.
- Warranty: 30-Day Warranty + Lifetime Support.
More options
Also available for: VFC SCAR-H AEG, VFC M110A AEG, VFC HK417, VFC FAL, WE SCAR-H
Want to compare every option? Use the VFC SCAR-H MK17/APFG XM7 Adapter Builder.
