The TAPP MP5 Adapter lets your AimTop SVD run regular AEG MP5 magazines.
Spec card
| Type | MP5 |
|---|---|
| Feeds from | AEG MP5 mags |
| BB capacity | 65-110+ |
| Overall profile | Medium |
| Recommended mags | CYMA, MAG or Matrix mid-cap |
| Best for | Secondary |
Compatibility
| Brand / Platform | Compatibility Verification | Tuning & Adjustment Notes |
|---|---|---|
| AIM Top SVD GBB / CO2 Series | Direct Native Fit | Direct OEM factory standard. Fine-tune the gasket height to establish a complete compression seal against the loading nozzle, ensuring maximum gas efficiency and reliable cycling without binding the bolt carrier. |
| AIM Top SVD (Pre-2013 Vintage vs. Late Batches) | Verified Fit (Tuning Recommended) | Older production runs feature minor receiver tolerances and striker positioning variances. Fine-tune gasket elevation to prevent top-seal air gaps and maintain proper seal alignment under high-pressure operation. |
| WE-Tech Ace-VD (SVD GBB) | NOT Compatible | WE-Tech uses a completely different, proprietary Open Bolt engine architecture with incompatible magazine latch geometry, output valve heights, and gas router seal profiles. |
What's in the box and how to install
- Plug and play: no pulling valves or feed lips from stock mags.
- Materials: standard body is Nylon PA12. Carbon Fiber is available (3x stiffness, up to 38% higher tensile strength than Nylon 12).
- Made in the USA by TAPP Airsoft.
- Install: insert with the bolt or slide locked back. US-spec Foster fitting included, never exceed 150 PSI, use a secondary low-pressure regulator.
- Warranty: 30-Day Warranty + Lifetime Support.
More options
Also available for: WE SVD
Want to compare every option? Use the AimTop SVD Adapter Builder.
