The TAPP Ambi Angled M4 Adapter angles a standard AEG M4 mag on your G&G MGCR for a lower, ambidextrous hold, built for competition.
Spec card
| Type | Ambi Angled M4 |
|---|---|
| Feeds from | AEG M4 mags, angled, ambidextrous |
| BB capacity | 30-250+ |
| Overall profile | Large |
| Recommended mags | PTS EPM1 or similar high-power mid-cap |
| Best for | Competitive play |
Compatibility
| Brand / Platform | Compatibility Verification | Tuning & Adjustment Notes |
|---|---|---|
| G&G MGCR 556 GBBR Series (7" / 10" / 12") | Direct Native Fit | Direct OEM factory standard for G&G's proprietary AR-15 platform. Features an adjustable plunger to calibrate engagement depth against the internal steel valve knocker pin. Fine-tune gasket height to achieve an airtight compression seal against the loading nozzle feed router without causing bolt carrier drag. |
| Tokyo Marui MWS / VFC / GHK / WE / WA M4 GBBR Lines | NOT Compatible | Third-party M4/AR-15 GBBR platforms utilize distinct valve knocker stroke lengths, output valve alignments, and magazine catch heights incompatible with G&G's proprietary MGCR engine architecture. |
What's in the box and how to install
- Plug and play: no pulling valves or feed lips from stock mags.
- Materials: standard body is Nylon PA12. Carbon Fiber is available (3x stiffness, up to 38% higher tensile strength than Nylon 12).
- Made in the USA by TAPP Airsoft.
- Install: insert with the bolt or slide locked back. US-spec Foster fitting included, never exceed 150 PSI, use a secondary low-pressure regulator.
- Warranty: 30-Day Warranty + Lifetime Support.
More options
Also available for: M4 AEG, VFC M4, KJW M4, KWA/KSC M4, GHK M4/MK18/G5, WE-Tech Open Bolt M4/M16/416/XM177/MK18/MSK/L85/SCAR-L, WA/WOC/GE/KA/Matrix/Inokatsu, SRC ZAROS SR4
Want to compare every option? Use the G&G MGCR Adapter Builder.
