The TAPP Ambi Angled M4 Adapter angles a standard AEG M4 mag on your KTC TEC-9 / KG-9 for a lower, ambidextrous hold, built for competition.
Spec card
| Type | Ambi Angled M4 |
|---|---|
| Feeds from | AEG M4 mags, angled, ambidextrous |
| BB capacity | 30-250+ |
| Overall profile | Large |
| Recommended mags | PTS EPM1 or similar high-power mid-cap |
| Best for | Competitive play |
Compatibility
| Brand / Platform | Compatibility Verification | Tuning & Adjustment Notes |
|---|---|---|
| KTC TEC-9 / KG-9 GBB Series | Direct Native Fit | Purpose-built for the KTC TEC-9 / KG-9 magazine well and feed geometry. Fine-tune the adjustable plunger height to establish a positive compression seal against the loading nozzle, maximising gas efficiency and feed consistency while preventing mechanical drag during the cycle. |
Compatible platforms: KTC TEC-9 and KG-9 only.
What's in the box and how to install
- Plug and play: no pulling valves or feed lips from stock mags.
- Materials: standard body is Nylon PA12. Carbon Fiber is available (3x stiffness, up to 38% higher tensile strength than Nylon 12).
- Made in the USA by TAPP Airsoft.
- Install: insert with the bolt or slide locked back. US-spec Foster fitting included, never exceed 150 PSI, use a secondary low-pressure regulator.
- Warranty: 30-Day Warranty + Lifetime Support.
More options
Want to compare every option? Use the KTC TEC-9 / KG-9 Adapter Builder.
