The TAPP Ambi Angled M4 Adapter angles a standard AEG M4 mag on your KWA MML Maten for a lower, ambidextrous hold, built for competition.
Spec card
| Type | Ambi Angled M4 |
|---|---|
| Feeds from | AEG M4 mags, angled, ambidextrous |
| BB capacity | 30-250+ |
| Overall profile | Large |
| Recommended mags | PTS EPM1 or similar high-power mid-cap |
| Best for | Competitive play |
Compatibility
| Brand / Platform | Compatibility Verification | Tuning & Adjustment Notes |
|---|---|---|
| KWA / PTS Mega Arms MML MATEN .308 GBBR | Direct Native Fit | Direct OEM factory standard for KWA's large-frame System7/NS2 .308 AR-10 platform. Features an adjustable plunger to calibrate engagement depth against the internal heavy valve striker pin. Fine-tune gasket height to form a tight compression seal against the enlarged .308 loading nozzle, preventing gas bypass without binding the bolt carrier. |
| KWA LM4 / PTS Radian Model 1 GBBR Series | NOT Compatible | While sharing KWA's System7 gas engine design principles, standard 5.56 STANAG magwell dimensions on LM4 and Radian platforms are significantly narrower than the MATEN's enlarged .308 receiver housing. |
What's in the box and how to install
- Plug and play: no pulling valves or feed lips from stock mags.
- Materials: standard body is Nylon PA12. Carbon Fiber is available (3x stiffness, up to 38% higher tensile strength than Nylon 12).
- Made in the USA by TAPP Airsoft.
- Install: insert with the bolt or slide locked back. US-spec Foster fitting included, never exceed 150 PSI, use a secondary low-pressure regulator.
- Warranty: 30-Day Warranty + Lifetime Support.
More options
Want to compare every option? Use the KWA MML Maten Adapter Builder.
