The TAPP Green Gas Drum is a 400-round green gas drum (AW Custom) for your Maruyama SCW-9 that bolts on with no HPA setup.
Spec card
| Type | Green Gas Drum |
|---|---|
| Feeds from | Green gas (GBB) drum |
| BB capacity | 400 |
| Overall profile | Large |
| Recommended mags | AW Custom |
| Best for | Plug and play, no HPA setup needed |
Color options
- Black: 400-round AW Custom green gas drum in black
- Red: 400-round AW Custom green gas drum in red
- Green: 400-round AW Custom green gas drum in green
- Green/Black: 400-round AW Custom green gas drum in green/black
- AW Adapter Only: adapter only, for an AW green gas drum you already own
Compatibility
| Brand / Platform | Compatibility Verification | Tuning & Adjustment Notes |
|---|---|---|
| Maruyama SCW-9 (native SCW-9 magazine well) | Direct Native Fit | Purpose-built for the Maruyama SCW-9 magazine well and feed geometry. Seat the adapter fully and confirm a positive seal against the loading nozzle for maximum gas efficiency and consistent feeding, without introducing drag on the reciprocating assembly. |
| Maruyama MPIX / TP9 / MP9 | Direct Native Fit (Shared SCW-9 Magazine) | Maruyama's MPIX, TP9 and MP9 use the same native SCW-9 magazine well. Fit and tuning are identical — no additional adjustment required. Note: the Maruyama MP9 is a different gun to the KWA/KSC MP9 and does not share its magazine. |
| Maruyama SCW-9 (GSeries / Glock-style magazine well) | NOT Compatible | The GSeries lower uses a Glock-pattern magazine well with different catch geometry. Use our Maruyama SCW-9 (GSeries) adapter for that configuration. |
| Maruyama SCW-9 (MP9-style magazine well) / KWA & KSC MP9 | NOT Compatible | The MP9-style SCW-9 lower uses a KWA MP9-pattern magazine well — a different magazine to the Maruyama MP9 above. Use our KWA MP9/VMP-1 adapter for that configuration. |
The SCW-9 is offered in three magazine-well configurations — native SCW-9, GSeries (Glock-style) and MP9-style (KWA MP9 pattern). This adapter fits the native SCW-9 well, as used by the SCW-9, MPIX, TP9 and Maruyama MP9. Check which lower you have before ordering.
What's in the box and how to install
- Plug and play: no pulling valves or feed lips from stock mags.
- Materials: standard body is Nylon PA12. Carbon Fiber is available (3x stiffness, up to 38% higher tensile strength than Nylon 12).
- Made in the USA by TAPP Airsoft.
- Install: insert with the bolt or slide locked back.
- Warranty: 30-Day Warranty + Lifetime Support.
More options
Also available for: KWA MP9/VMP-1, VORSK VMP2, Umarex/KWA Beretta PMX
Want to compare every option? Use the Maruyama SCW-9 Adapter Builder.
