The TAPP Ambi Angled M4 Adapter angles a standard AEG M4 mag on your Maruyama SCW-9 (GSeries) for a lower, ambidextrous hold, built for competition.
Spec card
| Type | Ambi Angled M4 |
|---|---|
| Feeds from | AEG M4 mags, angled, ambidextrous |
| BB capacity | 30-250+ |
| Overall profile | Large |
| Recommended mags | PTS EPM1 or similar high-power mid-cap |
| Best for | Competitive play |
Compatibility
| Brand / Platform | Compatibility Verification | Tuning & Adjustment Notes |
|---|---|---|
| Maruyama SCW-9 (GSeries / Glock-style magazine well) | Direct Native Fit | Purpose-built for the Glock-pattern magazine well and feed geometry used by the SCW-9 GSeries. Seat the adapter fully and confirm a positive seal against the loading nozzle for maximum gas efficiency and consistent feeding, without introducing drag on the reciprocating assembly. |
| Maruyama FMG-9 / SCW-9G / SPC-9G | Direct Native Fit (Shared Glock-Style Magazine) | These share the Glock-pattern magazine well. Fit and tuning are identical — no additional adjustment required. |
| Maruyama SCW-9 (MP9-style magazine well) | NOT Compatible | The MP9-style variant of the SCW-9 uses a KWA MP9-pattern magazine well with different catch geometry. Use our Maruyama SCW-9 adapter for that configuration. |
What's in the box and how to install
- Plug and play: no pulling valves or feed lips from stock mags.
- Materials: standard body is Nylon PA12. Carbon Fiber is available (3x stiffness, up to 38% higher tensile strength than Nylon 12).
- Made in the USA by TAPP Airsoft.
- Install: insert with the bolt or slide locked back. US-spec Foster fitting included, never exceed 150 PSI, use a secondary low-pressure regulator.
- Warranty: 30-Day Warranty + Lifetime Support.
More options
Also available for: G-Series/GLK, GHK GSeries/GLK, VFC GSeries/GLK, Elite Force GLK 42, KWA/KSC ATP & ATP-Z
Want to compare every option? Use the Maruyama SCW-9 (GSeries) Adapter Builder.
