The TAPP Drum Adapter puts a 400-2,500+ round drum on your Maruyama SCW-9 for suppressive fire.
Spec card
| Type | Drum |
|---|---|
| Feeds from | Drum magazine (pre-installed) |
| BB capacity | 400-2,500+ |
| Overall profile | Medium to Large |
| Recommended mags | Tokyo Marui or Angel Custom drum |
| Best for | Suppressive fire and general skirmishes |
Drum options
- 400rd Mini: 400-round mini drum
- 1500rd Flash: 1,500-round flash drum
- 1500rd Electric: 1,500-round electric drum
- 1500rd Electric Tan: 1,500-round electric drum in tan
- 2000rd Flash: 2,000-round flash drum
- 2000rd Electric: 2,000-round electric drum
- 1200rd Twin: 1,200-round twin drum
- Adapter Only – Angel Custom: adapter only, for an Angel Custom drum you already own
- Adapter Only – TM Mini: adapter only, for a Tokyo Marui mini drum you already own
- Adapter Only – TM Twin: adapter only, for a Tokyo Marui twin drum you already own
- Adapter Only – A&K: adapter only, for an A&K drum you already own
- Adapter Only – ICS: adapter only, for an ICS drum you already own
Compatibility
| Brand / Platform | Compatibility Verification | Tuning & Adjustment Notes |
|---|---|---|
| Maruyama SCW-9 (native SCW-9 magazine well) | Direct Native Fit | Purpose-built for the Maruyama SCW-9 magazine well and feed geometry. Seat the adapter fully and confirm a positive seal against the loading nozzle for maximum gas efficiency and consistent feeding, without introducing drag on the reciprocating assembly. |
| Maruyama MPIX / TP9 / MP9 | Direct Native Fit (Shared SCW-9 Magazine) | Maruyama's MPIX, TP9 and MP9 use the same native SCW-9 magazine well. Fit and tuning are identical — no additional adjustment required. Note: the Maruyama MP9 is a different gun to the KWA/KSC MP9 and does not share its magazine. |
| Maruyama SCW-9 (GSeries / Glock-style magazine well) | NOT Compatible | The GSeries lower uses a Glock-pattern magazine well with different catch geometry. Use our Maruyama SCW-9 (GSeries) adapter for that configuration. |
| Maruyama SCW-9 (MP9-style magazine well) / KWA & KSC MP9 | NOT Compatible | The MP9-style SCW-9 lower uses a KWA MP9-pattern magazine well — a different magazine to the Maruyama MP9 above. Use our KWA MP9/VMP-1 adapter for that configuration. |
The SCW-9 is offered in three magazine-well configurations — native SCW-9, GSeries (Glock-style) and MP9-style (KWA MP9 pattern). This adapter fits the native SCW-9 well, as used by the SCW-9, MPIX, TP9 and Maruyama MP9. Check which lower you have before ordering.
What's in the box and how to install
- Plug and play: no pulling valves or feed lips from stock mags.
- Materials: standard body is Nylon PA12. Carbon Fiber is available (3x stiffness, up to 38% higher tensile strength than Nylon 12).
- Made in the USA by TAPP Airsoft.
- Install: insert with the bolt or slide locked back. US-spec Foster fitting included, never exceed 150 PSI, use a secondary low-pressure regulator.
- Warranty: 30-Day Warranty + Lifetime Support.
More options
Also available for: KWA MP9/VMP-1, VORSK VMP2, Umarex/KWA Beretta PMX
Want to compare every option? Use the Maruyama SCW-9 Adapter Builder.
