The TAPP Drum Adapter puts a 400-2,500+ round drum on your Umarex / VFC H&K UMP45 for suppressive fire.
Spec card
| Type | Drum |
|---|---|
| Feeds from | Drum magazine (pre-installed) |
| BB capacity | 400-2,500+ |
| Overall profile | Medium to Large |
| Recommended mags | Tokyo Marui or Angel Custom drum |
| Best for | Suppressive fire and general skirmishes |
Drum options
- 400rd Mini: 400-round mini drum
- 1500rd Flash: 1,500-round flash drum
- 1500rd Electric: 1,500-round electric drum
- 1500rd Electric Tan: 1,500-round electric drum in tan
- 2000rd Flash: 2,000-round flash drum
- 2000rd Electric: 2,000-round electric drum
- 1200rd Twin: 1,200-round twin drum
- Adapter Only – Angel Custom: adapter only, for an Angel Custom drum you already own
- Adapter Only – TM Mini: adapter only, for a Tokyo Marui mini drum you already own
- Adapter Only – TM Twin: adapter only, for a Tokyo Marui twin drum you already own
- Adapter Only – A&K: adapter only, for an A&K drum you already own
- Adapter Only – ICS: adapter only, for an ICS drum you already own
Compatibility
| Brand / Platform | Compatibility Verification | Tuning & Adjustment Notes |
|---|---|---|
| Umarex / VFC H&K UMP45 GBB Series | Direct Native Fit | Direct OEM factory standard for the VFC-manufactured UMP45 gas platform. Fine-tune gasket height to achieve a tight compression seal against the loading nozzle seal, ensuring maximum gas efficiency without binding the bolt during cycling. |
| Umarex / VFC H&K UMP9 GBB Series | Verified Fit (Shared Internal Gas Architecture) | Shares the VFC UMP blowback engine, upper receiver housing, and valve knocker alignment. Fine-tune gasket height to ensure full seal contact against the nozzle rubber and prevent air loss during rapid fire. |
| VFC MP5 / G3 / HK53 / KWA SMG GBBR Series | NOT Compatible | Third-party and non-UMP SMG platforms utilize distinct magazine catch heights, locking lug channels, and non-matching gas router seal contours that will not seat or seal in the UMP magwell housing. |
What's in the box and how to install
- Plug and play: no pulling valves or feed lips from stock mags.
- Materials: standard body is Nylon PA12. Carbon Fiber is available (3x stiffness, up to 38% higher tensile strength than Nylon 12).
- Made in the USA by TAPP Airsoft.
- Install: insert with the bolt or slide locked back. US-spec Foster fitting included, never exceed 150 PSI, use a secondary low-pressure regulator.
- Warranty: 30-Day Warranty + Lifetime Support.
More options
Also available for: Umarex UMP AEG
Want to compare every option? Use the Umarex / VFC H&K UMP45 Adapter Builder.
