The TAPP Ambi Angled M4 Adapter angles a standard AEG M4 mag on your VFC FAL for a lower, ambidextrous hold, built for competition.
Spec card
| Type | Ambi Angled M4 |
|---|---|
| Feeds from | AEG M4 mags, angled, ambidextrous |
| BB capacity | 30-250+ |
| Overall profile | Large |
| Recommended mags | PTS EPM1 or similar high-power mid-cap |
| Best for | Competitive play |
Compatibility
| Brand / Platform | Compatibility Verification | Tuning & Adjustment Notes |
|---|---|---|
| VFC FAL | Direct Native Fit | Purpose-built for the VFC FAL magazine well and feed geometry. Fine-tune the adjustable plunger height to establish a positive compression seal against the loading nozzle, maximising gas efficiency and feed consistency while preventing mechanical drag during the cycle. |
| VFC SR25 / M110 / SCAR-H MK17 / APFG XM7 / HK417 | Direct Native Fit | These share the same VFC large-frame 7.62 magazine shell and feed geometry as the FAL platform, so this adapter installs and seals the same way. |
Also sold as dedicated listings: VFC SCAR-H MK17/APFG XM7 HPA Adapter/Drum and VFC HK417 HPA Adapter/Drum — all four use the same magazine, so any of these listings will fit any of these platforms.
What's in the box and how to install
- Plug and play: no pulling valves or feed lips from stock mags.
- Materials: standard body is Nylon PA12. Carbon Fiber is available (3x stiffness, up to 38% higher tensile strength than Nylon 12).
- Made in the USA by TAPP Airsoft.
- Install: insert with the bolt or slide locked back. US-spec Foster fitting included, never exceed 150 PSI, use a secondary low-pressure regulator.
- Warranty: 30-Day Warranty + Lifetime Support.
More options
Also available for: VFC SCAR-H AEG, VFC M110A AEG, VFC HK417, VFC SCAR-H MK17/APFG XM7, WE SCAR-H
Want to compare every option? Use the VFC FAL Adapter Builder.
