The TAPP Ambi Angled M4 Adapter angles a standard AEG M4 mag on your KWA MP9/VMP-1 for a lower, ambidextrous hold, built for competition.
Spec card
| Type | Ambi Angled M4 |
|---|---|
| Feeds from | AEG M4 mags, angled, ambidextrous |
| BB capacity | 30-250+ |
| Overall profile | Large |
| Recommended mags | PTS EPM1 or similar high-power mid-cap |
| Best for | Competitive play |
Compatibility
| Brand / Platform | Compatibility Verification | Tuning & Adjustment Notes |
|---|---|---|
| KWA / KSC MP9 & TP9, VORSK VMP-1 GBB SMG Series | Direct Native Fit | Direct OEM factory standard for KWA / KSC MP9 and TP9 platforms, as well as the VORSK VMP-1 series (which utilizes KWA MP9-system magazine architecture). Fine-tune the adjustable gasket height to establish an airtight compression seal against the bolt carrier nozzle assembly, ensuring maximum gas efficiency and sustained high rates of fire without creating friction against the reciprocating bolt mechanism. |
| Maruyama SCW-9 (MP9-style magazine well) | Direct Native Fit (Shared KWA MP9 Magazine) | The MP9-style SCW-9 lower is built around the KWA MP9-system magazine, so this adapter also installs and seals in that configuration. |
| Maruyama SCW-9 (native) / MPIX / TP9 / Maruyama MP9 | NOT Compatible | These use Maruyama's own native SCW-9 magazine well — the Maruyama MP9 is a different gun to the KWA/KSC MP9 despite the shared name. Use our Maruyama SCW-9 adapter for those. The GSeries / Glock-style SCW-9 is a third magazine well again — use our Maruyama SCW-9 (GSeries) adapter. |
| KWA MP7 / KWA PMX / VFC & TM SMG Lines | NOT Compatible | KWA MP7, KWA PMX, and third-party SMG platforms (VFC, Tokyo Marui) feature entirely different magazine casing profiles, retention notch placements, valve striker locations, and proprietary gas router geometry incompatible with KWA MP9 / VORSK VMP-1 architecture. |
What's in the box and how to install
- Plug and play: no pulling valves or feed lips from stock mags.
- Materials: standard body is Nylon PA12. Carbon Fiber is available (3x stiffness, up to 38% higher tensile strength than Nylon 12).
- Made in the USA by TAPP Airsoft.
- Install: insert with the bolt or slide locked back. US-spec Foster fitting included, never exceed 150 PSI, use a secondary low-pressure regulator.
- Warranty: 30-Day Warranty + Lifetime Support.
More options
Also available for: VORSK VMP2, Maruyama SCW-9, Umarex/KWA Beretta PMX
Want to compare every option? Use the KWA MP9/VMP-1 Adapter Builder.
