The TAPP Ambi Angled M4 Adapter angles a standard AEG M4 mag on your VORSK VMP2 for a lower, ambidextrous hold, built for competition.
Spec card
| Type | Ambi Angled M4 |
|---|---|
| Feeds from | AEG M4 mags, angled, ambidextrous |
| BB capacity | 30-250+ |
| Overall profile | Large |
| Recommended mags | PTS EPM1 or similar high-power mid-cap |
| Best for | Competitive play |
Compatibility
| Brand / Platform | Compatibility Verification | Tuning & Adjustment Notes |
|---|---|---|
| VORSK VMP-2 GBB SMG / Rifle Series | Direct Native Fit | Direct OEM factory standard for the VORSK VMP-2 gas blowback series and dedicated VMP-2 pattern magazine platforms. Establish an airtight compression seal against the loading nozzle assembly to maximize gas efficiency and ensure smooth cycling without creating mechanical drag on the reciprocating bolt carrier mechanism. |
| KWA MP9 / VMP-1 / TM / VFC & Third-Party SMG Lines | NOT Compatible | KWA MP9-pattern platforms (including the VORSK VMP-1), Tokyo Marui, VFC, and other third-party gas blowback SMG lines feature entirely different magazine body dimensions, retention catch locations, valve striker heights, and gas router seal geometry incompatible with the VMP-2 platform. |
What's in the box and how to install
- Plug and play: no pulling valves or feed lips from stock mags.
- Materials: standard body is Nylon PA12. Carbon Fiber is available (3x stiffness, up to 38% higher tensile strength than Nylon 12).
- Made in the USA by TAPP Airsoft.
- Install: insert with the bolt or slide locked back. US-spec Foster fitting included, never exceed 150 PSI, use a secondary low-pressure regulator.
- Warranty: 30-Day Warranty + Lifetime Support.
More options
Also available for: KWA MP9/VMP-1, Maruyama SCW-9, Umarex/KWA Beretta PMX
Want to compare every option? Use the VORSK VMP2 Adapter Builder.
